CARE pRoDUCtS FoR WAtER-MISCIBLE SYStEMS
product Description
AntIFoAM SH 2 Silicone oil free defoamer for water mixed cutting lubricants based on polyethersiloxan, suspension in water.
1:10 dilution prior use is recommended.
AntIFoAM SF Defoamer for water mixed cutting lubricants. Dilution with emulsion or water is recommended in order to achieve a better
dispersion and performance. Also suitable for not water miscible cutting oils.
AntIFoAM CAS Defoamer for water mixed cutting lubricants to be used in soft waters or if the calcium concentration is reduced.
It helps achieve increased water hardness.
InHIBItoR pLUS The product is used to increase the pH value of water mixed cutting lubricants.
At a concentration of 0.1% of the lubricant volume the pH value is increased up to 0.3.
The product best performance is achieved if it is added timely, that is pH value > 8.5.
The product has a stabilizing effect on the cooling lubricant system.
InHIBItoR CC This product successfully prevents the release of non-ferrous metals (e.g. Cu) in watery substances.
Product concentration 0.4 up to 1.0 Vol.% of the circulation system.
ADDItIV pt The product is used undiluted to improve the rinsing and cleaning capacity of water mixed cutting lubricants and cleaning
solutions. This product can be mixed with water with any concentration.
The concentration is normally about 0.5% depending on the desired effect.
BoDECID SYStEM CLEAnER Low-foam system cleaner for circulation systems with water mixed coolants. The formulation is R-43-free.
It has great dirt holding capacity as well as good micro-biocide effect.
S&M GRotAn oD Broad-spectrum microbiocide with a good instant effect and a long-lasting protection.
S&M GRotAn F 15 Very effective fungicide with well-balanced effect spectrum.
AQUAVLIES C Viscose and polyester fibre fleece for universal application. It can be tied and is very resistant both in the length and in the breadth.
AQUAVLIES CRF Polyester and polypropylene fleece made using a needle-process. Due to this mechanical reinforcing process this fleece is very
tear resistant. It provides deep filtering with good storage capacity. (Suited for the processing of cast iron)
Come trovarci
Indirizzo
Via Enrico Fermi, 41 / 43
36030 Costabissara (Vicenza)tel / > 0444 557401
fax / >0444 557401
mitrovich@mitrovich.info
cell: 335 1384360
Orari
lunedì—venerdì: 8:00–12:30
lunedì—venerdì: 14,30–18:30Ricerca